Fit check before print Photo slots:
1) installed in a vehicle
2) top down with a ruler on the holes

front

side

detail

drawing

Installer parts · PETG

Tracker bracket, 38 x 30 mm centres

PETG 38 x 30 mm centres, M3 slots 2 to 4 working days

KES 1,200 each · VAT inclusive · 1,000 each from 10

Top view. 38 mm is hole centre to centre, slotted ±3 mm horizontally only. 30 mm is vertical and exact. Plate is 62 × 44 mm, so it takes a tracker body up to 58 × 40 mm. Measure centre to centre, not edge to edge.

Colour required

Tracker model, or the hole centres you measured required

Model, or centres as "36 × 28", or a photo of the underside with a ruler on WhatsApp. Fit confirmed within 4 working hours. A different footprint is modelled for KES 500, credited back on 10 or more.

Quantity	Unit price	Off each
1 to 9	1,200	—
10 to 49	1,000	200 off each
50 and above	quote	date confirmed before payment

Lead time is counted from the moment we confirm your payment. 50 or more is quoted with a date before you pay.

Hole pattern	38 x 30 mm centres, M3 slots, M3 slotted
Colour	Black for dashboards, or white
Material	PETG, 0.3 mm layers. Safe to about 70 C in service
Heat limit	Fit in shade under the dash, not on the dash top in direct sun
Finish	Visible layer lines. Printed, not moulded
Weight	20 g
Lead time	2 to 4 working days after payment confirmed
Delivery	Courier 300, free over KES 3,000. Free pickup in Nairobi

Order of events. You order, we confirm the fit within 4 working hours, and you pay only after that. If it does not fit we re-model it, or you take a refund and pay nothing for the print.

What we cannot promise. No structural rating on a printed part, no UV guarantee beyond about two years of Nairobi sun, and no PLA for anything that lives in a cabin.